The history of Formula E's cutting edge race cars from GEN1-2-3 to GEN3 Evo

Rejoignez la Formula E

Connectez-vous ou créez votre compte Formula E

C'est simple, rapide et gratuit pour s'inscrire

Vous aurez accès à :

  • Helmet

    Nouvelles. Analyse. Caractéristiques exclusives

  • Schedule

    Réservation prioritaire. Tarification lève-tôt

  • Trophy

    Compétitions. Réductions. Expériences

  • Podium

    Prédire. Vote. Gagner

POUR CONTINUER LA LECTURE...

Vous devrez vous connecter ou créer un compte Formula E.

The history of Formula E's cutting edge race cars from GEN1-2-3 to GEN3 Evo

Formula E has come a long way in less than 10 seasons. We've strode through two astronomical leaps in electric car performance and driven the revolution with the leap from GEN1, GEN2, GEN3 and on to the world's fastest most sustainable electric race car ever: the GEN3 Evo. So, how fast is Formula E's latest car? How big is its battery and how does GEN3 Evo perform?

Formula E's new GEN3 Evo race car

While the ABB FIA Formula E World Championship is just nine full seasons old, the on-track technology is ever-evolving and has undergone revolutionary changes in that nine-year spell. We've come a long way since we made our debut back in 2014...

How much power and how big was the battery in Formula E GEN1, and how fast could it go?

In Season 1, back in 2014, Formula E ushered in a revolution with the all-electric open-wheel GEN1 car - a first of its kind in motorsport. In the nine short years since, we waved goodbye to that initial era of mid-race car swaps and welcomed the next step-change in technology for Formula E with GEN2 in Season 5. More power and almost twice the usable energy capacity, effectively doubling range despite its battery being about the same size and weight as its predecessor. 

OUR STORY: The key moments in Formula E's history

From GEN1 to GEN2, as well as a huge jump in energy capacity, pace and performance kicked on a notch, too. Power output jumped from 150kW to 200kW in race trim between Season 1 and Season 7, with ATTACK MODE yielding a further 10kW and qualifying mode boosting power to 250kW. This shaved 0.2 seconds off the 0-100km/h sprint, which was reduced to 2.8 seconds - pushing top speed up to 280km/h (174mph) from 225km/h (140mph).

For Season 8 and GEN2's swansong, power was increased to a baseline 220kW with ATTACK MODE hitting the maximum output of our second era at 250kW or 335bhp.

06b109fe1d114875ae40d979448314c4

GEN2, exploded!

  GEN1 GEN2 GEN3
Overall length 5000mm 5200mm 5016.2mm
Overall height 1050mm 1063.5mm 1023.4mm
Overall width 1780mm 1800mm 1700mm
Wheelbase 3100mm 3100mm 2970.5mm
Minimum weight (incl. driver) 900kg 900kg 856kg
Maximum power 200kW
(270bhp)
250kW (335bhp) 350kW (470bhp)
Maximum regeneration 150kW 250kW 600kW
Energy recovery Approx 15% Approx 25% Over 40%
Top speed 225kmh/
140mph
280kmh / 174mph 320kmh / 200mph
Powertrain Rear only Rear only Front & rear

 

The GEN3 revolution: faster, lighter and more sustainable

Season 9 saw Formula E's third great leap and the GEN3 era, with the all-new GEN3 car, previewed and launched at the 2022 Monaco E-Prix, hitting the track for the first time in Valencia, at testing, that same year.

NEW TO FORMULA E? Catch up with every race from Seasons 1-9 in FULL!

The 2022/23 campaign saw the culmination of eight years of world class electric racing and everything learned by Formula E's teams and engineers hit the track - it's the pinnacle and intersection of high performance, efficiency and sustainability. The new GEN3 is lighter, smaller, faster and more sustainable than what came before, and incorporates a number of cutting edge features set to inspire and inform major automotive manufacturers into their next moves in the consumer car market while showing there need not be compromise in an electric racing car.

READ MORE: GEN3 explained

It's also the most efficient race car on the planet, with some 40% of the energy it expends recaptured for use through the rear and a new front powertrain, for up to 600kW total energy regeneration. So, that's not only a leap in power of almost 1.5x - bringing about a 0-100kmh sprint of around two seconds - but a near-doubling of regen capacity.

Gen3 body

Every aspect of GEN3 production has been rethought, redesigned and rebuilt to ensure the car sets the benchmark for high-performance, sustainable racing without compromise, while all suppliers must complete a life-cycle assessment of their products. For example, natural materials have been introduced to tyres, batteries and bodywork construction with life-cycle thinking at the core.

Early evolution: The fastest electric race car in the world

Before the leap to GEN3 and even GEN2, GEN1 itself saw a number of changes. In Season 2, the regulations were opened up to allow manufacturers to design their own motors, inverters, gearboxes and rear suspension, with power also bumped to 170kW (230bhp).

READ MORE: Formula E's cutting-edge cars and technology

For Season 3, a mid-life refresh for GEN1 introduced a redesigned and stronger front wing to better cope with the rigours of street racing, whilst regen saw a 50 percent improvement in efficiency thanks to a major battery technology upgrade - all while reducing the car's overall minimum weight by eight kilos.

GEN1

GEN1's swansong came in Season 4 with GEN2 on the horizon, but we still saw another 10kW bump to overall power. Then came GEN2 with its raft of changes and the ability to run a full race on a charge, and far faster than its predecessor. Safety improvements were built into the new car in the form of the FIA-mandated halo device and ATTACK MODE added an extra layer for drivers and race engineers to get their heads around - with a risk/reward power boost to incorporate into race strategies.

ATTACK MODE was made more potent in Season 6, being raised from 225kW to 235kW, with regen now so efficient that the FIA mandated a 1kWh reduction in usable energy for every lap spent under the BMW i Safety Car or full course yellow - meaning energy management would always remain a key component to any race-winning drive.

Every step of the way from GEN1, GEN2 to GEN3: Brazilian Lucas di Grassi, Season 3 champion

Lucas di Grassi has been with Formula E since day zero, pre-Season 1, in fact, and was there throughout the championship's formative moments before we got underway in 2014/15.

At that time, creating an all-electric open-wheel championship of the scope of Formula E was a tough ask. Nothing of its kind had been attempted before and the technology, though available, was very much in its infancy.

The 2016/17 champion said it was a case of using what was sure to work, before opening up the platform for manufacturers to tinker and develop - driving the race-track to road philosophy that is at Formula E's heart, as the series pushes clean, sustainable mobility forward - with what would take five years in the automotive sector taking just one in Formula E.

“The GEN1 car had to use technology that would be capable, as nobody had produced an electric racing car like it before,” said the Brazilian. “So, it was relatively simple – pretty basic in fact – but with scope for teams to make improvements and develop things.

“As soon as the technical restraints were opened up (from Season 2), you saw performance and efficiency improvements right away. A five-year development programme in the real world, aiming to create a 10 per cent efficiency saving from the motors, was completed in just a year of competition in Formula E.

Di Grassi Formula E champion

“By Season 4, we had the big step coming with GEN2. By then, people had learned best practices – what was right and what didn’t work quite so well – so a leap forward was possible. Moving from two cars to a single car was huge.

"As technology develops, electric cars will be able to go faster and further. The pace of development is incredible," adds di Grassi. "The point at which electric cars are cheaper, safer and easier to operate than combustion-engined cars is not far away at all and Formula E is accelerating that process. Combustion won’t be able to keep up.

"The purpose is to create a better, cleaner, safer future for mankind with innovation and technology. In general, people will naturally go for convenience and necessity, as well as the cheapest, best solution for them. So, we need to create technology that fills this gap and serves this purpose, then, the best option will be the most sustainable one – that’s the win-win situation to chase.”

GEN3 and the Guinness World Record-breaking future: GENBETA

We've already seen Formula E records tumble in Season 9 - even as teams are only beginning to scratch the surface of what's possible with the all-new equipment they have at hand. To flesh out that point, we didn't see GEN2 peak until the very last season it hit the track - some four years after its introduction.

Nissan's Sacha Fenestraz became the fastest man in Formula E with laps in Cape Town and Portland - both debut entries on the calendar. Season 9 champion Jake Dennis then took the honour of fastest over a lap with his Duels time in Oregon. That same weekend, we also saw Mitch Evans set the series' highest ever top speed.


There's far more to come, though.

"GEN3 brings a host of innovations, but we’re still committed to going a step beyond. We’re already thinking of the evolution we can bring through the four-year cycle," said then-FIA Technical Manager and GEN3 Project Lead Alessandra Ciliberti after the GEN3 launch in Monaco, 2022.

"We’re investigating using the front powertrain kit in traction as well as regen to allow for four-wheel drive-in specific scenarios and then looking even further to GEN4 we have to ensure Formula E remains at the forefront as the laboratory for future mobility. We will work through and understand the challenges the manufacturers face from a technical perspective to make sure it remains the perfect platform for them."

As it happens, we have just seen the first use of the front powertrain in traction - offering a tantalising glimpse of what's to come next with four-wheel drive and an extra 50kW of power, via GENBETA's Guinness World Record-smashing effort in London.

GENBETA test driver Bruno Correia gives final instructions to Jake Hughes

The GENBETA car featured a range of modifications to effectively ‘unlock’ the specifications of the GEN3 race car:

  • Enhanced battery power output of 400kW, up from 350kW in the GEN3, through the activation of the front powertrain kit in traction, delivering all-wheel drive for the first time in a Formula E car. The battery was charged by ABB, the title partner and official charging partner of the Championship
  • New, softer iON Race tyre compound allowing faster warm-up and better peak grip, developed by Hankook Tire, official tyre supplier of Formula E
  • 3D printed front wing endplates, wheel fins and a wind deflector with circular, more sustainable thermoplastic solutions developed by SABIC, principal partner of the ABB FIA Formula E World Championship, to optimise aerodynamics for enhanced straight line speed of the GENBETA
     

In addition to technology innovations on the GENBETA car, Google Cloud provided generative artificial intelligence (AI) for analysis of the drivers’ runs. Using their leading platform, Vertex AI, drivers Jake Hughes and Lucas di Grassi were able to interpret real-time telemetry data to generate speed, power and grip recommendations. This gave them the ability to interact and converse with an interface to help fine tune their approach across their three attempts.

JN494 - THE BERRY - FE - GEN3 EXPLAINED_1920x1080__FINAL.1 - H264

GEN3 Evo: on-track from Season 11

Leveraging a roster of innovative technical upgrades, the GEN3 Evo unveiled at H.S.H Prince Albert II’s Private Car Collection will debut in Season 11 of the ABB FIA Formula E World Championship where some of the world’s greatest manufacturers and drivers race wheel-to-wheel in iconic locations around the globe. 

Developed by specialists from Formula E and the FIA, the latest GEN3 Evo edition marks a significant leap in electric racing technology, with acceleration 0-60mph 30% faster than a current F1 car, and 36% faster than the GEN3 car.

Capable of accelerating nearly a full second faster than its predecessor – the GEN3 – that was the world’s first race car designed for street racing, it sets an even higher standard in performance, sustainability, and efficiency. The GEN3 Evo serves as a formidable ambassador for the future of motorsport, embodying cutting-edge advancements and a commitment to environmental responsibility.


Key technical enhancements for the new GEN3 Evo race car include:

  • The quickest accelerating FIA single-seater race car – Capable of 0-60mph in 1.82 seconds (0-100kph in 1.86s), 30% faster than a current F1 car
  • Faster, stronger, more agile – Performance upgrades providing an estimated 2% performance gain from GEN3, equating to a c.2 secs faster qualifying lap on the Monaco circuit, offering world-class racing on any track
  • Leaner and meaner – An aggressive new body kit designed to be stronger, more robust and more aerodynamic, delivering closer wheel-to-wheel racing
  • All-wheel drive (AWD) –A first for a Formula E car, available during qualifying duels, race starts, and ATTACK MODE. This feature maximises acceleration and control, elevating the thrill of critical race moments and intensifying driver rivalries. AWD enhances both performance and strategy, providing more exciting racing for drivers and fans alike
  • Better grip – Optimised all-weather Hankook iON tyres providing 5-10% more grip, made from 35% recycled and sustainable materials (+9% vs GEN3 spec)

GEN3_EVO_SPECS_16x9 FINAL


These new additions are specifically designed for faster and closer racing between drivers, giving fans even more on-track action and building on the world-leading specification of the GEN3 car, including:

  • The fastest Formula E car: Top speed of 200mph
  • Regenerative braking: Cars optimise the 600kw regenerative braking capacity to generate nearly 50% of the energy needed for a race, during the race itself
  • Enhanced performance by software: Race performance upgrades made through software engineering
  • Most efficient Formula car ever: An electric motor with over 90% efficiency, significantly surpassing the 40% efficiency typical of internal combustion engines
  • Minimising production footprint: The world’s first net zero carbon race car in the world’s first net zero carbon sport
  • Sustainable battery development: Suppliers of battery cell minerals selected on ethical and sustainable mining standards to ensure a positive or neutral impact on people and the planet
  • Lifecycle thinking: Life cycle thinking throughout the car’s construction; second life and recycling for battery cells; recycled carbon fibre and natural materials such as linen integrated into the chassis
  • Conscientious supply chain: All suppliers held to strict sustainability KPIs, achieving FIA 3* Environmental Accreditation certification by Season 9
  • Race-to-road transfer: Specific road-relevant areas of the car are opened for development by teams and manufacturers, designed for direct tech transfer to automotive industry
  • Ultra-fast charging capability: A new technological development still in development, designed to allow a 30sec 600kw high-speed charge for additional energy mid-race